# Do not edit this file, it will be overwritten on update # The Madcatz RAT3 has a mode button that cycles through event codes. # On press, we get a release for the current mode and a press for the # next mode: # -event21 DEVICE_ADDED Madcatz Mad Catz R.A.T.3 Mouse seat0 default group1 cap:p left scroll-nat scroll-button # event21 POINTER_BUTTON +2.35s BTN_BACK (278) pressed, seat count: 1 # event21 POINTER_BUTTON +3.08s BTN_BACK (278) released, seat count: 0 # event21 POINTER_BUTTON +3.08s BTN_TASK (279) pressed, seat count: 1 # event21 POINTER_BUTTON +6.69s BTN_FORWARD (277) pressed, seat count: 1 # event21 POINTER_BUTTON +6.69s BTN_TASK (279) released, seat count: 0 # event21 POINTER_BUTTON +7.32s BTN_FORWARD (277) released, seat count: 0 # event21 POINTER_BUTTON +7.32s BTN_BACK (278) pressed, seat count: 1 # event21 POINTER_BUTTON +7.84s BTN_BACK (278) released, seat count: 0 # event21 POINTER_BUTTON +7.84s BTN_TASK (279) pressed, seat count: 1 # # Disable the event codes to avoid stuck buttons. [Madcatz RAT3] MatchUdevType=mouse MatchBus=usb MatchVendor=0x0738 MatchProduct=0x1703 # EV_KEY 0x115, 0x116, 0x117 AttrEventCodeDisable=EV_KEY:0x115;EV_KEY:0x116;EV_KEY:0x117 # Like the Madcatz RAT3, but with different codes: # event8 POINTER_BUTTON +0.488s ??? (280) pressed, seat count: 1 # event8 POINTER_BUTTON +1.275s ??? (280) released, seat count: 0 # event8 POINTER_BUTTON +1.275s ??? (281) pressed, seat count: 1 # event8 POINTER_BUTTON +3.585s ??? (281) released, seat count: 0 # event8 POINTER_BUTTON +3.585s ??? (282) pressed, seat count: 1 # event8 POINTER_BUTTON +4.184s ??? (280) pressed, seat count: 1 # event8 POINTER_BUTTON +4.184s ??? (282) released, seat count: 0 [Madcatz RAT7] MatchUdevType=mouse MatchBus=usb MatchVendor=0x0738 MatchProduct=0x1708 # EV_KEY 0x118, 0x119, 0x11A AttrEventCodeDisable=EV_KEY:0x118;EV_KEY:0x119;EV_KEY:0x11A