# -*- coding: utf-8 -*-
#
# (c) Copyright 2001-2015 HP Development Company, L.P.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
# Authors: Don Welch, Naga Samrat Chowdary Narla
#
#from __future__ import generators
# Std Lib
import sys
import time
import os
import gzip
import select
import struct
import signal
from base.sixext.moves import configparser
# Local
from base.g import *
from base import device, utils, pml, maint, models, pkit, os_utils
from prnt import cups
from base.sixext import PY3
from base.codes import *
from .ui_utils import *
import hpmudext
from installer.core_install import *
# Qt
from PyQt5.QtCore import *
from PyQt5.QtGui import *
from PyQt5.QtWidgets import *
import collections
# dbus
try:
import dbus
from dbus.mainloop.glib import DBusGMainLoop
from dbus import lowlevel
except ImportError:
log.error("Unable to load DBus libraries. Please check your installation and try again.")
if PY3: # Workaround due to incomplete Python3 support in Linux distros.
log.error("Please upgrade your python installation to the latest available version.")
sys.exit(1)
import warnings
# Ignore: .../dbus/connection.py:242: DeprecationWarning: object.__init__() takes no parameters
# (occurring on Python 2.6/dBus 0.83/Ubuntu 9.04)
warnings.simplefilter("ignore", DeprecationWarning)
# Main form
from .devmgr5_base import Ui_MainWindow
from .devmgr_ext import Ui_MainWindow_Derived
# Aux. dialogs
from .faxsetupdialog import FaxSetupDialog
from .plugindialog import PluginDialog
from .firmwaredialog import FirmwareDialog
from .aligndialog import AlignDialog
from .printdialog import PrintDialog
from .makecopiesdialog import MakeCopiesDialog
from .sendfaxdialog import SendFaxDialog
from .fabwindow import FABWindow
from .devicesetupdialog import DeviceSetupDialog
from .printtestpagedialog import PrintTestPageDialog
from .infodialog import InfoDialog
from .cleandialog import CleanDialog
from .colorcaldialog import ColorCalDialog
from .linefeedcaldialog import LineFeedCalDialog
from .pqdiagdialog import PQDiagDialog
from .nodevicesdialog import NoDevicesDialog
from .aboutdialog import AboutDialog
# Other forms and controls
from .settingsdialog import SettingsDialog
from .printsettingstoolbox import PrintSettingsToolbox
from base import os_utils
# all in seconds
MIN_AUTO_REFRESH_RATE = 5
MAX_AUTO_REFRESH_RATE = 60
DEF_AUTO_REFRESH_RATE = 30
device_list = {} # { Device_URI : device.Device(), ... }
model_obj = models.ModelData() # Used to convert dbus xformed data back to plain Python types
# ***********************************************************************************
#
# ITEM/UTILITY UI CLASSES
#
# ***********************************************************************************
class FuncViewItem(QListWidgetItem):
def __init__(self, parent, text, pixmap, tooltip_text, cmd):
QListWidgetItem.__init__(self, QIcon(pixmap), text, parent)
self.tooltip_text = tooltip_text
self.cmd = cmd
# XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
class DeviceViewItem(QListWidgetItem):
def __init__(self, parent, text, pixmap, device_uri, is_avail=True):
QListWidgetItem.__init__(self, QIcon(pixmap), text, parent)
self.device_uri = device_uri
self.is_avail = is_avail
self.setTextAlignment(Qt.AlignHCenter)
# XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
class PluginInstall(QObject):
def __init__(self, parent, plugin_type, plugin_installed):
self.parent = parent
self.plugin_type = plugin_type
self.plugin_installed = plugin_installed
def exec_(self):
install_plugin = True
if self.plugin_installed:
install_plugin = QMessageBox.warning(self.parent,
self.parent.windowTitle(),
self.__tr("<b>The HPLIP plugin is already installed.</b><p>Do you want to continue and re-install it?"),
QMessageBox.Yes | QMessageBox.No,
QMessageBox.NoButton) == QMessageBox.Yes
if install_plugin:
ok, sudo_ok = pkit.run_plugin_command(self.plugin_type == PLUGIN_REQUIRED, self.parent.cur_device.mq['plugin-reason'])
if not sudo_ok:
QMessageBox.critical(self.parent,
self.parent.windowTitle(),
self.__tr("<b>Unable to find an appropriate su/sudo utility to run hp-plugin.</b><p>Install kdesu, gnomesu, or gksu.</p>"),
QMessageBox.Ok | QMessageBox.NoButton,
QMessageBox.NoButton)
def __tr(self,s,c = None):
return qApp.translate("DevMgr5",s,c)
# ***********************************************************************************
#
# MAINWINDOW
#
# ***********************************************************************************
'''
class Ui_MainWindow_Derived(Ui_MainWindow):
def setupUi(self, MainWindow, latest_available_version, Is_autoInstaller_distro):
super().setupUi(MainWindow)
self.DiagnoseQueueAction = QAction(MainWindow)
self.DiagnoseQueueAction.setObjectName("DiagnoseQueueAction")
self.DiagnoseHPLIPAction = QAction(MainWindow)
self.DiagnoseHPLIPAction.setObjectName("DiagnoseHPLIPAction")
self.latest_available_version = latest_available_version
self.Is_autoInstaller_distro = Is_autoInstaller_distro
if self.latest_available_version is not "":
self.tab_3 = QWidget()
self.tab_3.setObjectName("tab_3")
self.label = QLabel(self.tab_3)
self.label.setGeometry(QRect(30, 45, 300, 17))
self.label.setObjectName("label")
if self.Is_autoInstaller_distro:
self.InstallLatestButton = QPushButton(self.tab_3)
self.InstallLatestButton.setGeometry(QRect(351, 40, 96, 27))
self.InstallLatestButton.setObjectName("pushButton")
else:
self.ManualInstalllabel = QLabel(self.tab_3)
self.ManualInstalllabel.setGeometry(QRect(30, 70,300, 45))
self.ManualInstalllabel.setObjectName("label")
self.InstallLatestButton = QPushButton(self.tab_3)
self.InstallLatestButton.setGeometry(QRect(295, 80, 110, 25))
self.InstallLatestButton.setObjectName("pushButton")
self.Tabs.addTab(self.tab_3, "")
# super().setupUi(MainWindow)
def retranslateUi(self, MainWindow):
super().retranslateUi(MainWindow)
if self.latest_available_version is not "":
self.label.setText(QtGui.QApplication.translate("MainWindow", "New version of HPLIP-%s is available"%self.latest_available_version, None))
self.Tabs.setTabText(self.Tabs.indexOf(self.tab_3), QtGui.QApplication.translate("MainWindow", "Upgrade", None))
if self.Is_autoInstaller_distro:
self.InstallLatestButton.setText(QtGui.QApplication.translate("MainWindow", "Install now", None))
else:
msg="Please install manually as mentioned in "
self.ManualInstalllabel.setText(QtGui.QApplication.translate("MainWindow", msg, None))
self.InstallLatestButton.setText(QtGui.QApplication.translate("MainWindow", "HPLIP website", None))
'''
class DevMgr5(Ui_MainWindow_Derived, Ui_MainWindow, QMainWindow):
def __init__(self, toolbox_version, initial_device_uri=None,
dbus_loop=None, parent=None, name=None, fl=0):
# QMainWindow.__init__(self, parent)
super(DevMgr5, self).__init__(parent)
log.debug("Initializing toolbox UI (Qt5)...")
log.debug("HPLIP Version: %s" % prop.installed_version)
self.toolbox_version = toolbox_version
self.initial_device_uri = initial_device_uri
self.device_vars = {}
self.num_devices = 0
self.cur_device = None
self.cur_printer = None
self.updating = False
self.init_failed = False
self.service = None
self.Is_autoInstaller_distro = False # True-->tier1(supports auto installation). False--> tier2(manual installation)
# Distro insformation
core = CoreInstall(MODE_CHECK)
# core.init()
self.Is_autoInstaller_distro = core.is_auto_installer_support()
# User settings
self.user_settings = UserSettings()
self.user_settings.load()
self.user_settings.debug()
self.cur_device_uri = self.user_settings.last_used_device_uri
installed_version=sys_conf.get('hplip','version')
if not utils.Is_HPLIP_older_version( installed_version, self.user_settings.latest_available_version):
self.setupUi(self,"",self.Is_autoInstaller_distro)
else:
self.setupUi(self, self.user_settings.latest_available_version,self.Is_autoInstaller_distro)
# Other initialization
self.initDBus()
self.initPixmaps()
self.initMisc()
self.initUI()
cups.setPasswordCallback(showPasswordUI)
if not prop.doc_build:
self.ContentsAction.setEnabled(False)
self.allow_auto_refresh = True
QTimer.singleShot(0, self.initalUpdate)
# ***********************************************************************************
#
# INIT
#
# ***********************************************************************************
# TODO: Make sbus init mandatory success, else exit
def initDBus(self):
self.dbus_loop = DBusGMainLoop(set_as_default=True)
self.dbus_avail, self.service, self.session_bus = device.init_dbus(self.dbus_loop)
if not self.dbus_avail:
log.error("dBus initialization error. Exiting.")
self.init_failed = True
return
# Receive events from the session bus
self.session_bus.add_signal_receiver(self.handleSessionSignal, sender_keyword='sender',
destination_keyword='dest', interface_keyword='interface',
member_keyword='member', path_keyword='path')
def initPixmaps(self):
self.func_icons_cached = False
self.func_icons = {}
self.device_icons = {}
# Application icon
self.setWindowIcon(QIcon(load_pixmap('hp_logo', '128x128')))
self.fax_icon = load_pixmap("fax2", "other")
def initUI(self):
# Setup device icon list
self.DeviceList.setSortingEnabled(True)
self.DeviceList.setContextMenuPolicy(Qt.CustomContextMenu)
self.setDeviceListViewMode(QListView.IconMode)
self.ViewAsIconsAction.triggered.connect(lambda: self.setDeviceListViewMode(QListView.IconMode))
self.ViewAsListAction.triggered.connect(lambda: self.setDeviceListViewMode(QListView.ListMode))
self.DeviceList.customContextMenuRequested["const QPoint &"].connect(self.DeviceList_customContextMenuRequested)
# Setup main menu
self.DeviceRefreshAction.setIcon(QIcon(load_pixmap("refresh1", "16x16")))
self.DeviceRefreshAction.triggered.connect(self.DeviceRefreshAction_activated)
self.RefreshAllAction.setIcon(QIcon(load_pixmap("refresh", "16x16")))
self.RefreshAllAction.triggered.connect(self.RefreshAllAction_activated)
self.SetupDeviceAction.setIcon(QIcon(load_pixmap('list_add', '16x16')))
self.SetupDeviceAction.triggered.connect(self.SetupDeviceAction_activated)
self.RemoveDeviceAction.setIcon(QIcon(load_pixmap('list_remove', '16x16')))
self.RemoveDeviceAction.triggered.connect(self.RemoveDeviceAction_activated)
self.PreferencesAction.setIcon(QIcon(load_pixmap('settings', '16x16')))
self.PreferencesAction.triggered.connect(self.PreferencesAction_activated)
#self.DiagnoseQueueAction.setIcon(QIcon(load_pixmap('warning', '16x16')))
#self.DiagnoseQueueAction.triggered.connect(self.DiagnoseQueueAction_activated)
#self.DiagnoseHPLIPAction.setIcon(QIcon(load_pixmap('troubleshoot', '16x16')))
#self.DiagnoseHPLIPAction.triggered.connect(self.DiagnoseHPLIP_activated)
self.ContentsAction.setIcon(QIcon(load_pixmap("help", "16x16")))
self.ContentsAction.triggered.connect(self.helpContents)
self.QuitAction.setIcon(QIcon(load_pixmap("quit", "16x16")))
self.QuitAction.triggered.connect(self.quit)
self.AboutAction.triggered.connect(self.helpAbout)
self.PrintControlPrinterNameCombo.activated["const QString &"].connect(self.PrintControlPrinterNameCombo_activated)
self.PrintSettingsPrinterNameCombo.activated["const QString &"].connect(self.PrintSettingsPrinterNameCombo_activated)
signal.signal(signal.SIGINT, signal.SIG_IGN)
# Init tabs/controls
self.initActionsTab()
self.initStatusTab()
self.initSuppliesTab()
self.initPrintSettingsTab()
self.initPrintControlTab()
self.Tabs.currentChanged[int].connect(self.Tabs_currentChanged)
# Resize the splitter so that the device list starts as a single column
self.splitter.setSizes([80, 600])
# Setup the Device List
self.DeviceList.setIconSize(QSize(60, 60))
self.DeviceList.currentItemChanged["QListWidgetItem *", "QListWidgetItem *"].connect(self.DeviceList_currentChanged)
def initMisc(self):
self.TabIndex = { 0: self.updateActionsTab,
1: self.updateStatusTab,
2: self.updateSuppliesTab,
3: self.updatePrintSettingsTab,
4: self.updatePrintControlTab,
5:self.updateHPLIPupgrade,
}
# docs
self.docs = "http://hplip.sf.net"
if prop.doc_build:
g = os.path.join(sys_conf.get('dirs', 'doc'), 'index.html')
if os.path.exists(g):
self.docs = "file://%s" % g
# support
self.support = "https://launchpad.net/hplip"
def initalUpdate(self):
if self.init_failed:
self.close()
return
self.rescanDevices()
cont = True
if self.initial_device_uri is not None:
if not self.activateDevice(self.initial_device_uri):
log.error("Device %s not found" % self.initial_device_uri)
cont = False
if self.cur_printer:
self.getPrinterState()
if self.printer_state == cups.IPP_PRINTER_STATE_STOPPED:
self.cur_device.sendEvent(EVENT_PRINTER_QUEUE_STOPPED, self.cur_printer)
if not self.printer_accepting:
self.cur_device.sendEvent(EVENT_PRINTER_QUEUE_REJECTING_JOBS, self.cur_printer)
def activateDevice(self, device_uri):
log.debug(log.bold("Activate: %s %s %s" % ("*"*20, device_uri, "*"*20)))
index = 0
d = self.DeviceList.item(index) #firstItem()
found = False
while d is not None:
if d.device_uri == device_uri:
found = True
self.DeviceList.setSelected(d, True)
self.DeviceList.setCurrentItem(d)
break
index += 1
d = self.DeviceList.item(index)
return found
# ***********************************************************************************
#
# UPDATES/NOTIFICATIONS
#
# ***********************************************************************************
def handleSessionSignal(self, *args, **kwds):
if kwds['interface'] == 'com.hplip.Toolbox' and \
kwds['member'] == 'Event':
log.debug("Handling event...")
event = device.Event(*args[:6])
event.debug()
if event.event_code < EVENT_MIN_USER_EVENT:
pass
elif event.event_code == EVENT_DEVICE_UPDATE_REPLY:
log.debug("EVENT_DEVICE_UPDATE_REPLY (%s)" % event.device_uri)
dev = self.findDeviceByURI(event.device_uri)
if dev is not None:
try:
self.service.GetStatus(event.device_uri, reply_handler=self.handleStatusReply,
error_handler=self.handleStatusError)
except dbus.exceptions.DBusException as e:
log.error("dbus call to GetStatus() failed.")
elif event.event_code == EVENT_USER_CONFIGURATION_CHANGED:
log.debug("EVENT_USER_CONFIGURATION_CHANGED")
self.user_settings.load()
elif event.event_code == EVENT_HISTORY_UPDATE:
log.debug("EVENT_HISTORY_UPDATE (%s)" % event.device_uri)
dev = self.findDeviceByURI(event.device_uri)
if dev is not None:
self.updateHistory(dev)
elif event.event_code == EVENT_SYSTEMTRAY_EXIT:
log.debug("EVENT_SYSTEMTRAY_EXIT")
log.warn("HPLIP Status Service was closed. HPLIP Device Manager will now exit.")
cups.releaseCupsInstance()
self.close()
elif event.event_code == EVENT_RAISE_DEVICE_MANAGER:
log.debug("EVENT_RAISE_DEVICE_MANAGER")
self.showNormal()
self.setWindowState(self.windowState() & ~Qt.WindowMinimized | Qt.WindowActive)
self.raise_()
elif event.event_code in (EVENT_DEVICE_START_POLLING,
EVENT_DEVICE_STOP_POLLING,
EVENT_POLLING_REQUEST):
pass
else:
log.error("Unhandled event: %d" % event.event_code)
def handleStatusReply(self, device_uri, data):
dev = self.findDeviceByURI(device_uri)
if dev is not None:
t = {}
for key in data:
value = model_obj.convert_data(str(key), str(data[key]))
t.setdefault(key, value)
dev.dq = t.copy()
for d in dev.dq:
dev.__dict__[d.replace('-','_')] = dev.dq[d]
self.updateDevice(dev)
def handleStatusError(self, e):
log.error(str(e))
def updateHistory(self, dev=None):
if dev is None:
dev = self.cur_device
try:
self.service.GetHistory(dev.device_uri, reply_handler=self.handleHistoryReply,
error_handler=self.handleHistoryError)
except dbus.exceptions.DBusException as e:
log.error("dbus call to GetHistory() failed.")
def handleHistoryReply(self, device_uri, history):
dev = self.findDeviceByURI(device_uri)
if dev is not None:
result = []
history.reverse()
for h in history:
result.append(device.Event(*tuple(h)))
try:
self.error_code = result[0].event_code
except IndexError:
self.error_code = STATUS_UNKNOWN
dev.error_state = STATUS_TO_ERROR_STATE_MAP.get(self.error_code, ERROR_STATE_CLEAR)
dev.hist = result
self.updateDevice(dev)
def handleHistoryError(self, e):
log.error(str(e))
def sendMessage(self, device_uri, printer_name, event_code, username=prop.username,
job_id=0, title=''):
device.Event(device_uri, printer_name, event_code, username,
job_id, title).send_via_dbus(self.session_bus)
def timedRefresh(self):
if not self.updating and self.user_settings.auto_refresh and self.allow_auto_refresh:
log.debug("Refresh timer...")
self.cleanupChildren()
if self.user_settings.auto_refresh_type == 0:
self.requestDeviceUpdate()
else:
self.rescanDevices()
# ***********************************************************************************
#
# TAB/DEVICE CHANGE SLOTS
#
# ***********************************************************************************
def Tabs_currentChanged(self, tab=0):
""" Called when the active tab changes.
Update newly displayed tab.
"""
if self.cur_device is not None:
self.TabIndex[tab]()
def updateAllTabs(self):
for tab in self.TabIndex:
self.TabIndex[tab]()
def updateCurrentTab(self):
log.debug("updateCurrentTab()")
self.TabIndex[self.Tabs.currentIndex()]()
# ***********************************************************************************
#
# DEVICE ICON LIST/DEVICE UPDATE(S)
#
# ***********************************************************************************
def DeviceRefreshAction_activated(self):
self.DeviceRefreshAction.setEnabled(False)
self.requestDeviceUpdate()
self.DeviceRefreshAction.setEnabled(True)
def RefreshAllAction_activated(self):
self.rescanDevices()
def setDeviceListViewMode(self, mode):
if mode == QListView.ListMode:
self.DeviceList.setViewMode(QListView.ListMode)
self.ViewAsListAction.setEnabled(False)
self.ViewAsIconsAction.setEnabled(True)
else:
self.DeviceList.setViewMode(QListView.IconMode)
self.ViewAsListAction.setEnabled(True)
self.ViewAsIconsAction.setEnabled(False)
def createDeviceIcon(self, dev=None):
if dev is None:
dev = self.cur_device
try:
dev.icon
except AttributeError:
dev.icon = "default_printer"
try:
self.device_icons[dev.icon]
except:
self.device_icons[dev.icon] = load_pixmap(dev.icon, 'devices')
pix = self.device_icons[dev.icon]
w, h = pix.width(), pix.height()
error_state = dev.error_state
icon = QPixmap(w, h)
p = QPainter(icon)
p.eraseRect(0, 0, icon.width(), icon.height())
p.drawPixmap(0, 0, pix)
try:
tech_type = dev.tech_type
except AttributeError:
tech_type = TECH_TYPE_NONE
if dev.device_type == DEVICE_TYPE_FAX:
p.drawPixmap(w - self.fax_icon.width(), 0, self.fax_icon)
if error_state != ERROR_STATE_CLEAR:
if tech_type in (TECH_TYPE_COLOR_INK, TECH_TYPE_MONO_INK):
status_icon = getStatusOverlayIcon(error_state)[0] # ink
else:
status_icon = getStatusOverlayIcon(error_state)[1] # laser
if status_icon is not None:
p.drawPixmap(0, 0, status_icon)
p.end()
return icon
def refreshDeviceList(self):
global devices
log.debug("Rescanning device list...")
if 1:
beginWaitCursor()
self.updating = True
self.setWindowTitle(self.__tr("Refreshing Device List - HP Device Manager"))
self.statusBar().showMessage(self.__tr("Refreshing device list..."))
self.cups_devices = device.getSupportedCUPSDevices(['hp', 'hpfax'])
current = None
try:
adds = []
for d in self.cups_devices:
if d not in device_list:
adds.append(d)
log.debug("Adds: %s" % ','.join(adds))
removals = []
for d in device_list:
if d not in self.cups_devices:
removals.append(d)
log.debug("Removals (1): %s" % ','.join(removals))
updates = []
for d in device_list:
if d not in adds and d not in removals:
updates.append(d)
log.debug("Updates: %s" % ','.join(updates))
for d in adds:
log.debug("adding: %s" % d)
# Note: Do not perform any I/O with this device.
dev = device.Device(d, service=self.service, disable_dbus=False)
if not dev.supported:
log.debug("Unsupported model - removing device.")
removals.append(d)
continue
icon = self.createDeviceIcon(dev)
if dev.device_type == DEVICE_TYPE_FAX:
DeviceViewItem(self.DeviceList, self.__tr("%s (Fax)"%dev.model_ui),
icon, d)
else:
if dev.fax_type:
DeviceViewItem(self.DeviceList, self.__tr("%s (Printer)"%dev.model_ui),
icon, d)
else:
DeviceViewItem(self.DeviceList, dev.model_ui,
icon, d)
device_list[d] = dev
log.debug("Removals (2): %s" % ','.join(removals))
removed_device=None
for d in removals:
removed_device = d
index = self.DeviceList.count()-1
item = self.DeviceList.item(index)
log.debug("removing: %s" % d)
try:
del device_list[d]
except KeyError:
pass
while index >= 0 and item is not None:
if item.device_uri == d:
self.DeviceList.takeItem(index)
break
index -= 1
item = self.DeviceList.item(index)
qApp.processEvents()
self.DeviceList.updateGeometry()
qApp.processEvents()
if len(device_list):
for tab in self.TabIndex:
self.Tabs.setTabEnabled(tab, True)
if self.cur_device_uri:
index = 0
item = first_item = self.DeviceList.item(index)
while item is not None:
qApp.processEvents()
if item.device_uri == self.cur_device_uri:
current = item
self.statusBar().showMessage(self.cur_device_uri)
break
index += 1
item = self.DeviceList.item(index)
else:
self.cur_device = None
self.cur_device_uri = ''
if self.cur_device is None:
i = self.DeviceList.item(0)
if i is not None:
self.cur_device_uri = i.device_uri
self.cur_device = device_list[self.cur_device_uri]
current = i
self.updatePrinterCombos()
if self.cur_device_uri:
#user_conf.set('last_used', 'device_uri',self.cur_device_uri)
self.user_settings.last_used_device_uri = self.cur_device_uri
self.user_settings.save()
for d in updates + adds:
if d not in removals:
self.requestDeviceUpdate(device_list[d])
else: # no devices
self.cur_device = None
self.DeviceRefreshAction.setEnabled(False)
self.RemoveDeviceAction.setEnabled(False)
#self.DiagnoseQueueAction.setEnabled(False)
self.updating = False
self.statusBar().showMessage(self.__tr("Press F6 to refresh."))
for tab in self.TabIndex:
self.Tabs.setTabEnabled(tab, False)
endWaitCursor()
dlg = NoDevicesDialog(self)
dlg.exec_()
finally:
self.updating = False
endWaitCursor()
if current is not None:
self.DeviceList.setCurrentItem(current)
self.DeviceRefreshAction.setEnabled(True)
if self.cur_device is not None:
self.RemoveDeviceAction.setEnabled(True)
#self.DiagnoseQueueAction.setEnabled(True)
self.statusBar().showMessage(self.cur_device_uri)
self.updateWindowTitle()
def updateWindowTitle(self):
if self.cur_device.device_type == DEVICE_TYPE_FAX:
self.setWindowTitle(self.__tr("HP Device Manager - %s (Fax)"%self.cur_device.model_ui))
else:
if self.cur_device.fax_type:
self.setWindowTitle(self.__tr("HP Device Manager - %s (Printer)"%self.cur_device.model_ui))
else:
self.setWindowTitle(self.__tr("HP Device Manager - %s"%self.cur_device.model_ui))
self.statusBar().showMessage(self.cur_device_uri)
def updateDeviceByURI(self, device_uri):
return self.updateDevice(self.findDeviceByURI(device_uri))
def updateDevice(self, dev=None, update_tab=True):
""" Update the device icon and currently displayed tab.
"""
if dev is None:
dev = self.cur_device
log.debug("updateDevice(%s)" % dev.device_uri)
item = self.findItem(dev)
if item is not None:
item.setIcon(QIcon(self.createDeviceIcon(dev)))
if dev is self.cur_device and update_tab:
self.updatePrinterCombos()
self.updateCurrentTab()
self.statusBar().showMessage(self.cur_device_uri)
if self.cur_device.device_type == DEVICE_TYPE_PRINTER:
self.Tabs.setTabText(self.Tabs.indexOf(self.Settings), QApplication.translate("MainWindow", "Print Settings", None))
self.Tabs.setTabText(self.Tabs.indexOf(self.Control), QApplication.translate("MainWindow", "Printer Control", None))
else:
self.Tabs.setTabText(self.Tabs.indexOf(self.Settings), QApplication.translate("MainWindow", "Fax Settings", None))
self.Tabs.setTabText(self.Tabs.indexOf(self.Control), QApplication.translate("MainWindow", "Fax Control", None))
def DeviceList_currentChanged(self, i, j):
if i is not None and not self.updating:
self.cur_device_uri = self.DeviceList.currentItem().device_uri
self.cur_device = device_list[self.cur_device_uri]
#user_conf.set('last_used', 'device_uri', self.cur_device_uri)
self.user_settings.last_used_device_uri = self.cur_device_uri
self.user_settings.save()
self.updateDevice()
self.updateWindowTitle()
def findItem(self, dev):
if dev is None:
dev = self.cur_device
return self.findItemByURI(dev.device_uri)
def findItemByURI(self, device_uri):
index = 0
item = self.DeviceList.item(index)
while item is not None:
if item.device_uri == device_uri:
return item
index += 1
item = self.DeviceList.item(index)
def findDeviceByURI(self, device_uri):
try:
return device_list[device_uri]
except:
return None
def requestDeviceUpdate(self, dev=None, item=None):
""" Submit device update request to update thread. """
if dev is None:
dev = self.cur_device
if dev is not None:
dev.error_state = ERROR_STATE_REFRESHING
self.updateDevice(dev, update_tab=False)
self.sendMessage(dev.device_uri, '', EVENT_DEVICE_UPDATE_REQUESTED)
def rescanDevices(self):
""" Rescan and update all devices. """
if not self.updating:
self.RefreshAllAction.setEnabled(False)
try:
self.refreshDeviceList()
finally:
self.RefreshAllAction.setEnabled(True)
def callback(self):
qApp.processEvents()
# ***********************************************************************************
#
# DEVICE LIST RIGHT CLICK
#
# ***********************************************************************************
def DeviceList_customContextMenuRequested(self, p):
d = self.cur_device
if d is not None:
avail = d.device_state != DEVICE_STATE_NOT_FOUND and d.supported
printer = d.device_type == DEVICE_TYPE_PRINTER and avail
fax = d.fax_type > FAX_TYPE_NONE and prop.fax_build and d.device_type == DEVICE_TYPE_FAX and \
sys.hexversion >= 0x020300f0 and avail
scan = d.scan_type > SCAN_TYPE_NONE and prop.scan_build and \
printer and self.user_settings.cmd_scan
cpy = d.copy_type > COPY_TYPE_NONE and printer
popup = QMenu(self)
item = self.DeviceList.currentItem()
if item is not None:
if self.cur_device.error_state != ERROR_STATE_ERROR:
if printer:
popup.addAction(self.__tr("Print..."), lambda: self.contextMenuFunc(PrintDialog(self, self.cur_printer)))
if scan:
popup.addAction(self.__tr("Scan..."), lambda: self.contextMenuFunc(self.user_settings.cmd_scan)) #self.ScanButton_clicked)
if cpy:
popup.addAction(self.__tr("Make Copies..."), lambda: MakeCopiesDialog(self, self.cur_device_uri)) #self.MakeCopiesButton_clicked)
else: # self.cur_device.device_type == DEVICE_TYPE_FAX:
if fax:
popup.addAction(self.__tr("Send Fax..."), lambda: self.contextMenuFunc(SendFaxDialog(self, self.cur_printer, self.cur_device_uri))) #self.SendFaxButton_clicked)
popup.addSeparator()
if not self.updating:
popup.addAction(self.__tr("Refresh Device"), self.requestDeviceUpdate) #self.DeviceRefreshAction_activated)
if not self.updating:
popup.addAction(self.__tr("Refresh All"), self.rescanDevices) #self.RefreshAllAction_activated)
popup.addSeparator()
if self.DeviceList.viewMode() == QListView.IconMode:
popup.addAction(self.__tr("View as List"), lambda: self.setDeviceListViewMode(QListView.ListMode))
else:
popup.addAction(self.__tr("View as Icons"), lambda: self.setDeviceListViewMode(QListView.IconMode))
popup.exec_(self.DeviceList.mapToGlobal(p))
def contextMenuFunc(self, f):
self.sendMessage('', '', EVENT_DEVICE_STOP_POLLING)
try:
try:
f.exec_() # Dialog
except AttributeError:
beginWaitCursor()
if f.split(':')[0] in ('http', 'https', 'file'):
log.debug("Opening browser to: %s" % f)
utils.openURL(f)
else:
self.runExternalCommand(f)
QTimer.singleShot(1000, self.unlockClick)
finally:
self.sendMessage('', '', EVENT_DEVICE_START_POLLING)
# ***********************************************************************************
#
# PRINTER NAME COMBOS
#
# ***********************************************************************************
def updatePrinterCombos(self):
self.PrintSettingsPrinterNameCombo.clear()
self.PrintControlPrinterNameCombo.clear()
if self.cur_device is not None and \
self.cur_device.supported:
self.cur_device.updateCUPSPrinters()
for c in self.cur_device.cups_printers:
self.PrintSettingsPrinterNameCombo.insertItem(0, c)
self.PrintControlPrinterNameCombo.insertItem(0, c)
self.cur_printer = to_unicode(self.PrintSettingsPrinterNameCombo.currentText())
def PrintSettingsPrinterNameCombo_activated(self, s):
self.cur_printer = to_unicode(s)
self.updateCurrentTab()
def PrintControlPrinterNameCombo_activated(self, s):
self.cur_printer = to_unicode(s)
self.updateCurrentTab()
# ***********************************************************************************
#
# FUNCTIONS/ACTION TAB
#
# ***********************************************************************************
def initActionsTab(self):
self.click_lock = None
self.ActionsList.setIconSize(QSize(32, 32))
self.ActionsList.itemClicked["QListWidgetItem *"].connect(self.ActionsList_clicked)
self.ActionsList.itemDoubleClicked["QListWidgetItem *"].connect(self.ActionsList_clicked)
def updateActionsTab(self):
beginWaitCursor()
try:
self.ActionsList.clear()
d = self.cur_device
if d is not None:
avail = d.device_state != DEVICE_STATE_NOT_FOUND and d.supported
fax = d.fax_type > FAX_TYPE_NONE and prop.fax_build and d.device_type == DEVICE_TYPE_FAX and \
sys.hexversion >= 0x020300f0 and avail
printer = d.device_type == DEVICE_TYPE_PRINTER and avail
scan = d.scan_type > SCAN_TYPE_NONE and prop.scan_build and \
printer and self.user_settings.cmd_scan
cpy = d.copy_type > COPY_TYPE_NONE and printer
req_plugin = d.plugin == PLUGIN_REQUIRED
opt_plugin = d.plugin == PLUGIN_OPTIONAL
try:
back_end, is_hp, bus, model, serial, dev_file, host, zc, port = \
device.parseDeviceURI(self.cur_device_uri)
except Error:
return
hplip_conf = configparser.ConfigParser()
fp = open("/etc/hp/hplip.conf", "r")
hplip_conf.readfp(fp)
fp.close()
try:
plugin_installed = utils.to_bool(hplip_conf.get("hplip", "plugin"))
except configparser.NoOptionError:
plugin_installed = False
if d.plugin != PLUGIN_NONE:
if req_plugin and plugin_installed:
x = self.__tr("Download and install<br>required plugin (already installed).")
elif req_plugin and not plugin_installed:
x = self.__tr("Download and install<br>required plugin (needs installation).")
elif opt_plugin and plugin_installed:
x = self.__tr("Download and install<br>optional plugin (already installed).")
elif opt_plugin and not plugin_installed:
x = self.__tr("Download and install<br>optional plugin (needs installation).")
else:
x = ''
# TODO: Cache this data structure
# -- add a field that specifies if the icon should always show, or only when device is avail.
# TODO: Tooltips
# TODO: Right-click icon/list view menu
self.ICONS = [
# PRINTER
(lambda : printer,
self.__tr("Print"), # Text
"print", # Icon
self.__tr("Print documents or files."), # Tooltip
lambda : PrintDialog(self, self.cur_printer)), # command/action
(lambda :scan,
self.__tr("Scan"),
"scan",
self.__tr("Scan a document, image, or photograph.<br>"),
self.user_settings.cmd_scan),
(lambda : cpy,
self.__tr("Make Copies"),
"makecopies",
self.__tr("Make copies on the device controlled by the PC.<br>"),
lambda : MakeCopiesDialog(self, self.cur_device_uri)),
# FAX
(lambda: fax,
self.__tr("Send Fax"),
"fax",
self.__tr("Send a fax from the PC."),
lambda : SendFaxDialog(self, self.cur_printer, self.cur_device_uri)),
(lambda: fax,
self.__tr("Fax Setup"),
"fax_setup",
self.__tr("Fax support must be setup before you can send faxes."),
lambda : FaxSetupDialog(self, self.cur_device_uri)),
(lambda: fax and self.user_settings.cmd_fab,
self.__tr("Fax Address Book"),
"fab",
self.__tr("Setup fax phone numbers to use when sending faxes from the PC."),
self.user_settings.cmd_fab),
# SETTINGS/TOOLS
(lambda : d.power_settings != POWER_SETTINGS_NONE and avail,
self.__tr("Device Settings"),
"settings",
self.__tr("Your device has special device settings.<br>You may alter these settings here."),
lambda : DeviceSetupDialog(self, self.cur_device_uri)),
(lambda : printer,
self.__tr("Print Test Page"),
"testpage",
self.__tr("Print a test page to test the setup of your printer."),
lambda : PrintTestPageDialog(self, self.cur_printer)),
(lambda : True,
self.__tr("View Printer and Device Information"),
"cups",
self.__tr("View information about the device and all its CUPS queues."),
lambda : InfoDialog(self, self.cur_device_uri)),
(lambda: printer and d.align_type != ALIGN_TYPE_NONE,
self.__tr("Align Cartridges (Print Heads)"),
"align",
self.__tr("This will improve the quality of output when a new cartridge is installed."),
lambda : AlignDialog(self, self.cur_device_uri)),
(lambda: printer and d.clean_type != CLEAN_TYPE_NONE,
self.__tr("Clean Printheads"),
"clean",
self.__tr("You only need to perform this action if you are<br>having problems with poor printout quality due to clogged ink nozzles."),
lambda : CleanDialog(self, self.cur_device_uri)),
(lambda: printer and d.color_cal_type != COLOR_CAL_TYPE_NONE and d.color_cal_type == COLOR_CAL_TYPE_TYPHOON,
self.__tr("Color Calibration"),
"colorcal",
self.__tr("Use this procedure to optimimize your printer's color output<br>(requires glossy photo paper)."),
lambda : ColorCalDialog(self, self.cur_device_uri)),
(lambda: printer and d.color_cal_type != COLOR_CAL_TYPE_NONE and d.color_cal_type != COLOR_CAL_TYPE_TYPHOON,
self.__tr("Color Calibration"),
"colorcal",
self.__tr("Use this procedure to optimimize your printer's color output."),
lambda : ColorCalDialog(self, self.cur_device_uri)),
(lambda: printer and d.linefeed_cal_type != LINEFEED_CAL_TYPE_NONE,
self.__tr("Line Feed Calibration"),
"linefeed_cal",
self.__tr("Use line feed calibration to optimize print quality<br>(to remove gaps in the printed output)."),
lambda : LineFeedCalDialog(self, self.cur_device_uri)),
(lambda: printer and d.pq_diag_type != PQ_DIAG_TYPE_NONE,
self.__tr("Print Diagnostic Page"),
"pq_diag",
self.__tr("Your printer can print a test page <br>to help diagnose print quality problems."),
lambda : PQDiagDialog(self, self.cur_device_uri)),
(lambda: printer and d.wifi_config >= WIFI_CONFIG_USB_XML and bus == 'usb',
self.__tr("Wireless/wifi setup using USB"),
"wireless",
self.__tr("Configure your wireless capable printer using a temporary USB connection."),
'hp-wificonfig -d %s' % self.cur_device_uri),
# FIRMWARE
(lambda : printer and d.fw_download ,
self.__tr("Download Firmware"),
"firmware",
self.__tr("Download firmware to your printer <br>(required on some devices after each power-up)."),
lambda : FirmwareDialog(self, self.cur_device_uri)),
# PLUGIN
(lambda : printer and req_plugin,
self.__tr("Install Required Plugin"),
"plugin",
x,
lambda : PluginInstall(self, d.plugin, plugin_installed)),
(lambda : printer and opt_plugin,
self.__tr("Install Optional Plugin"),
"plugin",
x,
lambda : PluginInstall(self, d.plugin, plugin_installed)),
# EWS
(lambda : printer and d.embedded_server_type > EWS_NONE and bus == 'net',
self.__tr("Open printer's web page in a browser"),
"ews",
self.__tr("The printer's web page has supply, status, and other information."),
openEWS(host, zc)),
# HELP/WEBSITE
(lambda : True,
self.__tr("Visit HPLIP Support Website"),
"hp_logo",
self.__tr("Visit HPLIP Support Website."),
self.support),
(lambda : True,
self.__tr("Help"),
"help",
self.__tr("View HPLIP help."),
self.docs),
]
if not self.func_icons_cached:
for filte, text, icon, tooltip, cmd in self.ICONS:
self.func_icons[icon] = load_pixmap(icon, '32x32')
self.func_icons_cached = True
for fltr, text, icon, tooltip, cmd in self.ICONS:
if fltr is not None:
if not fltr():
continue
FuncViewItem(self.ActionsList, text,
self.func_icons[icon],
tooltip,
cmd)
finally:
endWaitCursor()
def ActionsList_clicked(self, item):
if item is not None and self.click_lock is not item:
self.click_lock = item
if item.cmd and isinstance(item.cmd, collections.Callable):
dlg = item.cmd()
self.sendMessage('', '', EVENT_DEVICE_STOP_POLLING)
try:
dlg.exec_()
finally:
self.sendMessage('', '', EVENT_DEVICE_START_POLLING)
else:
beginWaitCursor()
if item.cmd.split(':')[0] in ('http', 'https', 'file'):
log.debug("Opening browser to: %s" % item.cmd)
utils.openURL(item.cmd)
else:
self.runExternalCommand(str(item.cmd))
QTimer.singleShot(1000, self.unlockClick)
def unlockClick(self):
self.click_lock = None
endWaitCursor()
def ActionsList_customContextMenuRequested(self, p):
print(p)
#pass
# ***********************************************************************************
#
# STATUS TAB
#
# ***********************************************************************************
def initStatusTab(self):
self.StatusTable.setColumnCount(0)
self.status_headers = [self.__tr(""), self.__tr("Status"), self.__tr("Date and Time"),
self.__tr("Code"), self.__tr("Job ID"), self.__tr("Description")]
def updateStatusTab(self):
self.updateStatusLCD()
self.updateStatusTable()
def updateStatusLCD(self):
if self.cur_device is not None and \
self.cur_device.hist and \
self.cur_device.supported:
dq = self.cur_device.dq
if dq.get('panel', 0) == 1:
line1 = dq.get('panel-line1', '')
line2 = dq.get('panel-line2', '')
else:
try:
line1 = device.queryString(self.cur_device.hist[0].event_code)
except (AttributeError, TypeError):
line1 = ''
line2 = ''
self.drawStatusLCD(line1, line2)
else:
if self.cur_device.status_type == STATUS_TYPE_NONE:
self.drawStatusLCD(self.__tr("Status information not"), self.__tr("available for this device."))
elif not self.cur_device.supported:
self.drawStatusLCD(self.__tr("Device not supported."))
elif not self.cur_device.hist:
self.drawStatusLCD(self.__tr("No status history available."))
else:
self.drawStatusLCD()
def drawStatusLCD(self, line1='', line2=''):
pm = load_pixmap('panel_lcd', 'other')
p = QPainter()
p.begin(pm)
p.setPen(QColor(0, 0, 0))
p.setFont(self.font())
x, y_line1, y_line2 = 10, 17, 33
# TODO: Scroll long lines
if line1:
p.drawText(x, y_line1, line1)
if line2:
p.drawText(x, y_line2, line2)
p.end()
self.LCD.setPixmap(pm)
def updateStatusTable(self):
self.StatusTable.clear()
flags = Qt.ItemIsSelectable | Qt.ItemIsEnabled
row = 0
hist = self.cur_device.hist[:]
if hist:
self.StatusTable.setRowCount(len(hist))
self.StatusTable.setColumnCount(len(self.status_headers))
self.StatusTable.setHorizontalHeaderLabels(self.status_headers)
self.StatusTable.verticalHeader().hide()
self.StatusTable.horizontalHeader().show()
hist.reverse()
row = len(hist)-1
for e in hist:
if e is None:
continue
ess = device.queryString(e.event_code, 0)
esl = device.queryString(e.event_code, 1)
if row == 0:
desc = self.__tr("(most recent)")
else:
desc = getTimeDeltaDesc(e.timedate)
dt = QDateTime()
dt.setTime_t(int(e.timedate)) #, Qt.LocalTime)
# TODO: In Qt4.x, use QLocale.toString(date, format)
tt = str("%s %s"%(dt.toString(),desc))
if e.job_id:
job_id = to_unicode(e.job_id)
else:
job_id = to_unicode('')
error_state = STATUS_TO_ERROR_STATE_MAP.get(e.event_code, ERROR_STATE_CLEAR)
tech_type = self.cur_device.tech_type
if tech_type in (TECH_TYPE_COLOR_INK, TECH_TYPE_MONO_INK):
status_pix = getStatusListIcon(error_state)[0] # ink
else:
status_pix = getStatusListIcon(error_state)[1] # laser
event_code = to_unicode(e.event_code)
i = QTableWidgetItem(QIcon(status_pix), self.__tr(""))
i.setFlags(flags)
self.StatusTable.setItem(row, 0, i)
for col, t in [(1, ess), (2, tt), (3, event_code), (4, job_id), (5, esl)]:
i = QTableWidgetItem(str(t))
i.setFlags(flags)
self.StatusTable.setItem(row, col, i)
row -= 1
self.StatusTable.resizeColumnsToContents()
self.StatusTable.setColumnWidth(0, 24)
else:
self.StatusTable.setRowCount(1)
self.StatusTable.setColumnCount(2)
self.StatusTable.setHorizontalHeaderLabels(["", ""])
self.StatusTable.verticalHeader().hide()
self.StatusTable.horizontalHeader().hide()
flags = Qt.ItemIsEnabled
pixmap = getStatusListIcon(ERROR_STATE_ERROR)[0]
i = QTableWidgetItem(QIcon(pixmap), self.__tr(""))
i.setFlags(flags)
self.StatusTable.setItem(row, 0, i)
i = QTableWidgetItem(self.__tr("Status information not available for this device."))
i.setFlags(flags)
self.StatusTable.setItem(0, 1, i)
self.StatusTable.resizeColumnsToContents()
self.StatusTable.setColumnWidth(0, 24)
# ***********************************************************************************
#
# SUPPLIES TAB
#
# ***********************************************************************************
def initSuppliesTab(self):
self.pix_battery = load_pixmap('battery', '16x16')
yellow = "#ffff00"
light_yellow = "#ffffcc"
cyan = "#00ffff"
light_cyan = "#ccffff"
magenta = "#ff00ff"
light_magenta = "#ffccff"
black = "#000000"
blue = "#0000ff"
gray = "#808080"
dark_gray = "#a9a9a9"
light_gray = "#c0c0c0"
red = "#ff0000"
self.TYPE_TO_PIX_MAP = {
AGENT_TYPE_UNSPECIFIED : [black],
AGENT_TYPE_BLACK: [black],
AGENT_TYPE_MATTE_BLACK : [black],
AGENT_TYPE_PHOTO_BLACK : [dark_gray],
AGENT_TYPE_BLACK_B8800: [black],
AGENT_TYPE_CMY: [cyan, magenta, yellow],
AGENT_TYPE_KCM: [light_cyan, light_magenta, light_yellow],
AGENT_TYPE_GGK: [dark_gray],
AGENT_TYPE_YELLOW: [yellow],
AGENT_TYPE_MAGENTA: [magenta],
AGENT_TYPE_CYAN : [cyan],
AGENT_TYPE_CYAN_LOW: [light_cyan],
AGENT_TYPE_YELLOW_LOW: [light_yellow],
AGENT_TYPE_MAGENTA_LOW: [light_magenta],
AGENT_TYPE_BLUE: [blue],
AGENT_TYPE_KCMY_CM: [yellow, cyan, magenta],
AGENT_TYPE_LC_LM: [light_cyan, light_magenta],
#AGENT_TYPE_Y_M: [yellow, magenta],
#AGENT_TYPE_C_K: [black, cyan],
AGENT_TYPE_LG_PK: [light_gray, dark_gray],
AGENT_TYPE_LG: [light_gray],
AGENT_TYPE_G: [gray],
AGENT_TYPE_DG: [dark_gray],
AGENT_TYPE_PG: [light_gray],
AGENT_TYPE_C_M: [cyan, magenta],
AGENT_TYPE_K_Y: [black, yellow],
AGENT_TYPE_LC: [light_cyan],
AGENT_TYPE_RED : [red],
}
self.supplies_headers = [self.__tr(""), self.__tr("Description"),
self.__tr("HP Part No."), self.__tr("Approx. Level"),
self.__tr("Status")]
def updateSuppliesTab(self):
beginWaitCursor()
flags = Qt.ItemIsSelectable | Qt.ItemIsEnabled
try:
self.SuppliesTable.clear()
self.SuppliesTable.setRowCount(0)
self.SuppliesTable.setColumnCount(0)
if self.cur_device is not None and \
self.cur_device.supported and \
self.cur_device.status_type != STATUS_TYPE_NONE and \
self.cur_device.device_state != DEVICE_STATE_NOT_FOUND:
self.cur_device.sorted_supplies = []
a = 1
while True:
try:
agent_type = int(self.cur_device.dq['agent%d-type' % a])
agent_kind = int(self.cur_device.dq['agent%d-kind' % a])
agent_sku = self.cur_device.dq['agent%d-sku' % a]
except KeyError:
break
else:
self.cur_device.sorted_supplies.append((a, agent_kind, agent_type, agent_sku))
a += 1
self.cur_device.sorted_supplies.sort(key=utils.cmp_to_key(utils.levelsCmp))
self.SuppliesTable.setRowCount(len(self.cur_device.sorted_supplies))
self.SuppliesTable.setColumnCount(len(self.supplies_headers))
self.SuppliesTable.setHorizontalHeaderLabels(self.supplies_headers)
self.SuppliesTable.verticalHeader().hide()
self.SuppliesTable.horizontalHeader().show()
self.SuppliesTable.setIconSize(QSize(100, 18))
for row, x in enumerate(self.cur_device.sorted_supplies):
a, agent_kind, agent_type, agent_sku = x
try:
agent_level = int(self.cur_device.dq['agent%d-level' % a])
agent_desc = self.cur_device.dq['agent%d-desc' % a]
agent_health_desc = self.cur_device.dq['agent%d-health-desc' % a]
except KeyError:
break
# Bar graph level
level_pixmap = None
if agent_kind in (AGENT_KIND_SUPPLY,
#AGENT_KIND_HEAD,
AGENT_KIND_HEAD_AND_SUPPLY,
AGENT_KIND_TONER_CARTRIDGE,
AGENT_KIND_MAINT_KIT,
AGENT_KIND_ADF_KIT,
AGENT_KIND_INT_BATTERY,
AGENT_KIND_DRUM_KIT,
):
level_pixmap = self.createStatusLevelGraphic(agent_level, agent_type)
# Color icon
pixmap = None
if agent_kind in (AGENT_KIND_SUPPLY,
AGENT_KIND_HEAD,
AGENT_KIND_HEAD_AND_SUPPLY,
AGENT_KIND_TONER_CARTRIDGE,
#AGENT_KIND_MAINT_KIT,
#AGENT_KIND_ADF_KIT,
AGENT_KIND_INT_BATTERY,
#AGENT_KIND_DRUM_KIT,
):
pixmap = self.getStatusIcon(agent_kind, agent_type)
if pixmap is not None:
i = QTableWidgetItem(QIcon(pixmap), self.__tr(""))
i.setFlags(flags)
self.SuppliesTable.setItem(row, 0, i)
for col, t in [(1, agent_desc), (2, agent_sku), (4, agent_health_desc)]:
i = QTableWidgetItem(str(t))
i.setFlags(flags)
self.SuppliesTable.setItem(row, col, i)
if level_pixmap is not None:
i = QTableWidgetItem(QIcon(level_pixmap), self.__tr(""))
i.setFlags(flags)
self.SuppliesTable.setItem(row, 3, i)
self.SuppliesTable.resizeColumnsToContents()
self.SuppliesTable.setColumnWidth(0, 24)
self.SuppliesTable.setColumnWidth(3, 120)
else: # No supplies info
log.warning("Supplies information not available for this device.")
flags = Qt.ItemIsEnabled
self.SuppliesTable.setRowCount(1)
self.SuppliesTable.setColumnCount(2)
self.SuppliesTable.setHorizontalHeaderLabels(["", ""])
self.SuppliesTable.verticalHeader().hide()
self.SuppliesTable.horizontalHeader().hide()
i = QTableWidgetItem(self.__tr("Supplies information not available for this device."))
i.setFlags(flags)
self.SuppliesTable.setItem(0, 1, i)
pixmap = getStatusListIcon(ERROR_STATE_ERROR)[0]
i = QTableWidgetItem(QIcon(pixmap), self.__tr(""))
i.setFlags(flags)
self.SuppliesTable.setItem(0, 0, i)
self.SuppliesTable.resizeColumnsToContents()
self.SuppliesTable.setColumnWidth(0, 24)
finally:
endWaitCursor()
def getStatusIcon(self, agent_kind, agent_type):
if agent_kind in (AGENT_KIND_SUPPLY,
AGENT_KIND_HEAD,
AGENT_KIND_HEAD_AND_SUPPLY,
AGENT_KIND_TONER_CARTRIDGE):
map = self.TYPE_TO_PIX_MAP[agent_type]
if isinstance(map, list):
map_len = len(map)
pix = QPixmap(16, 16)
pix.fill(QColor(0, 0, 0, 0))
p = QPainter()
p.begin(pix)
p.setRenderHint(QPainter.Antialiasing)
if map_len == 1:
p.setPen(QColor(map[0]))
p.setBrush(QBrush(QColor(map[0]), Qt.SolidPattern))
p.drawPie(2, 2, 10, 10, 0, 5760)
elif map_len == 2:
p.setPen(QColor(map[0]))
p.setBrush(QBrush(QColor(map[0]), Qt.SolidPattern))
p.drawPie(2, 4, 8, 8, 0, 5760)
p.setPen(QColor(map[1]))
p.setBrush(QBrush(QColor(map[1]), Qt.SolidPattern))
p.drawPie(6, 4, 8, 8, 0, 5760)
elif map_len == 3:
p.setPen(QColor(map[2]))
p.setBrush(QBrush(QColor(map[2]), Qt.SolidPattern))
p.drawPie(6, 6, 8, 8, 0, 5760)
p.setPen(QColor(map[1]))
p.setBrush(QBrush(QColor(map[1]), Qt.SolidPattern))
p.drawPie(2, 6, 8, 8, 0, 5760)
p.setPen(QColor(map[0]))
p.setBrush(QBrush(QColor(map[0]), Qt.SolidPattern))
p.drawPie(4, 2, 8, 8, 0, 5760)
p.end()
return pix
else:
return map
elif agent_kind == AGENT_KIND_INT_BATTERY:
return self.pix_battery
def createStatusLevelGraphic(self, percent, agent_type, w=100, h=18):
if percent:
fw = w/100*percent
else:
fw = 0
px = QPixmap(w, h)
px.fill(QColor(0, 0, 0, 0))
pp = QPainter()
pp.begin(px)
pp.setRenderHint(QPainter.Antialiasing)
pp.setPen(Qt.black)
map = self.TYPE_TO_PIX_MAP[agent_type]
map_len = len(map)
if map_len == 1 or map_len > 3:
pp.fillRect(0, 0, fw, h, QBrush(QColor(map[0])))
elif map_len == 2:
h2 = h / 2
pp.fillRect(0, 0, fw, h2, QBrush(QColor(map[0])))
pp.fillRect(0, h2, fw, h, QBrush(QColor(map[1])))
elif map_len == 3:
h3 = h / 3
h23 = 2 * h3
pp.fillRect(0, 0, fw, h3, QBrush(QColor(map[0])))
pp.fillRect(0, h3, fw, h23, QBrush(QColor(map[1])))
pp.fillRect(0, h23, fw, h, QBrush(QColor(map[2])))
# draw black frame
pp.drawRect(0, 0, w, h)
if percent > 75 and agent_type in \
(AGENT_TYPE_BLACK, AGENT_TYPE_UNSPECIFIED, AGENT_TYPE_BLUE):
pp.setPen(Qt.white)
# 75% ticks
w1 = 3 * w / 4
h6 = h / 6
pp.drawLine(w1, 0, w1, h6)
pp.drawLine(w1, h, w1, h-h6)
if percent > 50 and agent_type in \
(AGENT_TYPE_BLACK, AGENT_TYPE_UNSPECIFIED, AGENT_TYPE_BLUE):
pp.setPen(Qt.white)
# 50% ticks
w2 = w / 2
h4 = h / 4
pp.drawLine(w2, 0, w2, h4)
pp.drawLine(w2, h, w2, h-h4)
if percent > 25 and agent_type in \
(AGENT_TYPE_BLACK, AGENT_TYPE_UNSPECIFIED, AGENT_TYPE_BLUE):
pp.setPen(Qt.white)
# 25% ticks
w4 = w / 4
pp.drawLine(w4, 0, w4, h6)
pp.drawLine(w4, h, w4, h-h6)
pp.end()
return px
# ***********************************************************************************
#
# PRINTER SETTINGS TAB
#
# ***********************************************************************************
def initPrintSettingsTab(self):
pass
def updatePrintSettingsTab(self):
beginWaitCursor()
try:
if self.cur_device.device_type == DEVICE_TYPE_PRINTER:
self.PrintSettingsPrinterNameLabel.setText(self.__tr("Printer Name:"))
else:
self.PrintSettingsPrinterNameLabel.setText(self.__tr("Fax Name:"))
self.PrintSettingsToolbox.updateUi(self.cur_device, self.cur_printer)
finally:
endWaitCursor()
# ***********************************************************************************
#
# PRINTER CONTROL TAB
#
# ***********************************************************************************
def initPrintControlTab(self):
self.JOB_STATES = { cups.IPP_JOB_PENDING : self.__tr("Pending"),
cups.IPP_JOB_HELD : self.__tr("On hold"),
cups.IPP_JOB_PROCESSING : self.__tr("Printing"),
cups.IPP_JOB_STOPPED : self.__tr("Stopped"),
cups.IPP_JOB_CANCELLED : self.__tr("Canceled"),
cups.IPP_JOB_ABORTED : self.__tr("Aborted"),
cups.IPP_JOB_COMPLETED : self.__tr("Completed"),
}
self.CancelJobButton.setIcon(QIcon(load_pixmap('cancel', '16x16')))
self.RefreshButton.setIcon(QIcon(load_pixmap('refresh', '16x16')))
self.JOB_STATE_ICONS = { cups.IPP_JOB_PENDING: QIcon(load_pixmap("busy", "16x16")),
cups.IPP_JOB_HELD : QIcon(load_pixmap("busy", "16x16")),
cups.IPP_JOB_PROCESSING : QIcon(load_pixmap("print", "16x16")),
cups.IPP_JOB_STOPPED : QIcon(load_pixmap("warning", "16x16")),
cups.IPP_JOB_CANCELLED : QIcon(load_pixmap("warning", "16x16")),
cups.IPP_JOB_ABORTED : QIcon(load_pixmap("error", "16x16")),
cups.IPP_JOB_COMPLETED : QIcon(load_pixmap("ok", "16x16")),
}
self.StartStopButton.clicked.connect(self.StartStopButton_clicked)
self.AcceptRejectButton.clicked.connect(self.AcceptRejectButton_clicked)
self.SetDefaultButton.clicked.connect(self.SetDefaultButton_clicked)
self.CancelJobButton.clicked.connect(self.CancelJobButton_clicked)
self.RefreshButton.clicked.connect(self.RefreshButton_clicked)
self.job_headers = [self.__tr("Status"), self.__tr("Title/Description"), self.__tr("Job ID")]
# TODO: Check queues at startup and send events if stopped or rejecting
def initUpgradeTab(self):
self.InstallLatestButton.clicked.connect(self.InstallLatestButton_clicked)
self.InstallLatestButton_lock = False
def InstallLatestButton_clicked(self):
if self.InstallLatestButton_lock is True:
return
if self.Is_autoInstaller_distro:
self.InstallLatestButton.setEnabled(False)
terminal_cmd = utils.get_terminal()
if terminal_cmd is not None and utils.which("hp-upgrade"):
cmd = terminal_cmd + " 'hp-upgrade -w'"
os_utils.execute(cmd)
else:
log.error("Failed to run hp-upgrade command from terminal =%s "%terminal_cmd)
self.InstallLatestButton.setEnabled(True)
else:
self.InstallLatestButton_lock = True
utils.openURL("http://hplipopensource.com/hplip-web/install/manual/index.html")
QTimer.singleShot(1000, self.InstallLatestButton_unlock)
def InstallLatestButton_unlock(self):
self.InstallLatestButton_lock = False
def CancelJobButton_clicked(self):
item = self.JobTable.currentItem()
if item is not None:
job_id, ok = value_int(item.data(Qt.UserRole))
if ok and job_id:
self.cur_device.cancelJob(job_id)
QTimer.singleShot(1000, self.updatePrintControlTab)
def RefreshButton_clicked(self):
self.updatePrintControlTab()
def updateHPLIPupgrade(self):
self.initUpgradeTab()
def updatePrintControlTab(self):
if self.cur_device.device_type == DEVICE_TYPE_PRINTER:
self.PrintControlPrinterNameLabel.setText(self.__tr("Printer Name:"))
self.groupBox.setTitle(QApplication.translate("MainWindow", "Printer Queue Control", None))
else:
self.PrintControlPrinterNameLabel.setText(self.__tr("Fax Name:"))
self.groupBox.setTitle(QApplication.translate("MainWindow", "Fax Queue Control", None))
self.JobTable.clear()
self.JobTable.setRowCount(0)
self.JobTable.setColumnCount(0)
self.updatePrintController()
flags = Qt.ItemIsSelectable | Qt.ItemIsEnabled
jobs = cups.getJobs()
num_jobs = 0
for j in jobs:
if j.dest == self.cur_printer:
num_jobs += 1
if num_jobs:
self.CancelJobButton.setEnabled(True)
self.JobTable.setRowCount(num_jobs)
self.JobTable.setColumnCount(len(self.job_headers))
self.JobTable.setHorizontalHeaderLabels(self.job_headers)
for row, j in enumerate(jobs):
if j.dest == self.cur_printer:
i = QTableWidgetItem(self.JOB_STATE_ICONS[j.state], self.JOB_STATES[j.state])
i.setData(Qt.UserRole, j.id)
i.setFlags(flags)
self.JobTable.setItem(row, 0, i)
i = QTableWidgetItem(j.title)
i.setFlags(flags)
self.JobTable.setItem(row, 1, i)
i = QTableWidgetItem(to_unicode(j.id))
i.setFlags(flags)
self.JobTable.setItem(row, 2, i)
self.JobTable.setCurrentCell(0, 0)
self.JobTable.resizeColumnsToContents()
else:
self.CancelJobButton.setEnabled(False)
def getPrinterState(self):
self.printer_state = cups.IPP_PRINTER_STATE_IDLE
self.printer_accepting = True
cups_printers = cups.getPrinters()
for p in cups_printers:
if p.name == self.cur_printer:
self.printer_state = p.state
self.printer_accepting = p.accepting
break
def updatePrintController(self):
# default printer
self.SetDefaultButton.setText(self.__tr("Set as Default"))
default_printer = cups.getDefaultPrinter()
if self.cur_device.device_type == DEVICE_TYPE_PRINTER:
device_string = "Printer"
else:
device_string = "Fax"
if default_printer == self.cur_printer:
self.SetDefaultLabel.setText(self.__tr("Default %s"%device_string))
self.SetDefaultIcon.setPixmap(load_pixmap("ok", "16x16"))
self.SetDefaultButton.setEnabled(False)
else:
self.SetDefaultLabel.setText(self.__tr("Not Default %s"%device_string))
self.SetDefaultIcon.setPixmap(load_pixmap("info", "16x16"))
self.SetDefaultButton.setEnabled(True)
self.getPrinterState()
# start/stop
if self.printer_state == cups.IPP_PRINTER_STATE_IDLE:
self.StartStopLabel.setText(self.__tr("Started/Idle"))
self.StartStopIcon.setPixmap(load_pixmap("idle", "16x16"))
self.StartStopButton.setText(self.__tr("Stop %s"%device_string))
elif self.printer_state == cups.IPP_PRINTER_STATE_PROCESSING:
self.StartStopLabel.setText(self.__tr("Started/Processing"))
self.StartStopIcon.setPixmap(load_pixmap("busy", "16x16"))
self.StartStopButton.setText(self.__tr("Stop %s"%device_string))
else:
self.StartStopLabel.setText(self.__tr("Stopped"))
self.StartStopIcon.setPixmap(load_pixmap("warning", "16x16"))
self.StartStopButton.setText(self.__tr("Start %s"%device_string))
# reject/accept
if self.printer_accepting:
self.AcceptRejectLabel.setText(self.__tr("Accepting Jobs"))
self.AcceptRejectIcon.setPixmap(load_pixmap("idle", "16x16"))
self.AcceptRejectButton.setText(self.__tr("Reject Jobs"))
else:
self.AcceptRejectLabel.setText(self.__tr("Rejecting Jobs"))
self.AcceptRejectIcon.setPixmap(load_pixmap("warning", "16x16"))
self.AcceptRejectButton.setText(self.__tr("Accept Jobs"))
def StartStopButton_clicked(self):
beginWaitCursor()
try:
if self.printer_state in (cups.IPP_PRINTER_STATE_IDLE, cups.IPP_PRINTER_STATE_PROCESSING):
result, result_str = cups.cups_operation(cups.stop, GUI_MODE, 'qt4', self, self.cur_printer)
if result == cups.IPP_OK:
if self.cur_device.device_type == DEVICE_TYPE_PRINTER:
e = EVENT_PRINTER_QUEUE_STOPPED
else:
e = EVENT_FAX_QUEUE_STOPPED
else:
result, result_str = cups.cups_operation(cups.start, GUI_MODE, 'qt4', self, self.cur_printer)
if result == cups.IPP_OK:
if self.cur_device.device_type == DEVICE_TYPE_PRINTER:
e = EVENT_PRINTER_QUEUE_STARTED
else:
e = EVENT_FAX_QUEUE_STARTED
if result == cups.IPP_OK:
self.updatePrintController()
self.cur_device.sendEvent(e, self.cur_printer)
else:
FailureUI(self, self.__tr("<b>Start/Stop printer queue operation fails. </b><p>Error : %s"%result_str))
cups.releaseCupsInstance()
finally:
endWaitCursor()
def AcceptRejectButton_clicked(self):
beginWaitCursor()
try:
if self.printer_accepting:
result, result_str = cups.cups_operation(cups.reject, GUI_MODE, 'qt4', self, self.cur_printer)
if result == cups.IPP_OK:
if self.cur_device.device_type == DEVICE_TYPE_PRINTER:
e = EVENT_PRINTER_QUEUE_REJECTING_JOBS
else:
e = EVENT_FAX_QUEUE_REJECTING_JOBS
else:
result, result_str = cups.cups_operation(cups.accept, GUI_MODE, 'qt4', self, self.cur_printer)
if result == cups.IPP_OK:
if self.cur_device.device_type == DEVICE_TYPE_PRINTER:
e = EVENT_PRINTER_QUEUE_ACCEPTING_JOBS
else:
e = EVENT_FAX_QUEUE_ACCEPTING_JOBS
if result == cups.IPP_OK:
self.updatePrintController()
self.cur_device.sendEvent(e, self.cur_printer)
else:
FailureUI(self, self.__tr("<b>Accept/Reject printer queue operation fails.</b><p>Error : %s"%result_str))
cups.releaseCupsInstance()
finally:
endWaitCursor()
def SetDefaultButton_clicked(self):
beginWaitCursor()
try:
result, result_str = cups.cups_operation(cups.setDefaultPrinter, GUI_MODE, 'qt4', self, self.cur_printer.encode('utf8'))
if result != cups.IPP_OK:
FailureUI(self, self.__tr("<b>Set printer queue as default operation fails. </b><p>Error : %s"%result_str))
cups.releaseCupsInstance()
else:
self.updatePrintController()
if self.cur_device.device_type == DEVICE_TYPE_PRINTER:
e = EVENT_PRINTER_QUEUE_SET_AS_DEFAULT
else:
e = EVENT_FAX_QUEUE_SET_AS_DEFAULT
self.cur_device.sendEvent(e, self.cur_printer)
finally:
endWaitCursor()
def cancelCheckedJobs(self):
beginWaitCursor()
try:
item = self.JobTable.firstChild()
while item is not None:
if item.isOn():
self.cur_device.cancelJob(item.job_id)
item = item.nextSibling()
finally:
endWaitCursor()
self.updatePrintControlTab()
# ***********************************************************************************
#
# EXIT/CHILD CLEANUP
#
# ***********************************************************************************
def closeEvent(self, event):
self.cleanup()
event.accept()
def cleanup(self):
self.cleanupChildren()
def cleanupChildren(self):
log.debug("Cleaning up child processes.")
try:
os.waitpid(-1, os.WNOHANG)
except OSError:
pass
def quit(self):
self.cleanupChildren()
cups.releaseCupsInstance()
self.close()
# ***********************************************************************************
#
# DEVICE SETTINGS PLUGIN
#
# ***********************************************************************************
# ***********************************************************************************
#
# SETTINGS DIALOG
#
# ***********************************************************************************
def PreferencesAction_activated(self, tab_to_show=0):
dlg = SettingsDialog(self)
dlg.TabWidget.setCurrentIndex(tab_to_show)
if dlg.exec_() == QDialog.Accepted:
self.user_settings.load()
if self.cur_device is not None:
self.cur_device.sendEvent(EVENT_USER_CONFIGURATION_CHANGED, self.cur_printer)
# ***********************************************************************************
#
# SETUP/REMOVE
#
# ***********************************************************************************
def SetupDeviceAction_activated(self):
if utils.which('hp-setup'):
cmd = 'hp-setup --gui'
else:
cmd = 'python ./setup.py --gui'
log.debug(cmd)
utils.run(cmd)
self.rescanDevices()
self.updatePrinterCombos()
def RemoveDeviceAction_activated(self):
if utils.which('hp-setup'):
cmd = 'hp-setup --gui --remove'
else:
cmd = 'python ./setup.py --gui --remove'
if self.cur_device_uri is not None:
cmd += ' --device=%s' % self.cur_device_uri
log.debug(cmd)
utils.run(cmd)
self.rescanDevices()
self.updatePrinterCombos()
def DiagnoseQueueAction_activated(self):
if utils.which('hp-diagnose_queues'):
cmd= 'hp-diagnose_queues --gui'
else:
cmd= 'python ./diagnose_queues.py --gui'
log.debug(cmd)
# ok, output = utils.run(cmd)
os_utils.execute(cmd)
def DiagnoseHPLIP_activated(self):
if utils.which('hp-doctor'):
cmd = 'hp-doctor -i -w'
else:
cmd = 'python ./doctor.py -i -w'
terminal_cmd = utils.get_terminal()
if terminal_cmd:
cmd = terminal_cmd + " '%s'"%cmd
os_utils.execute(cmd)
# ***********************************************************************************
#
# MISC
#
# ***********************************************************************************
def runExternalCommand(self, cmd, macro_char='%'):
beginWaitCursor()
try:
if len(cmd) == 0:
FailureUI(self,self.__tr("<p><b>Unable to run command. No command specified.</b><p>Use <pre>Configure...</pre> to specify a command to run."))
log.error("No command specified. Use settings to configure commands.")
else:
log.debug("Run: %s %s (%s) %s" % ("*"*20, cmd, self.cur_device_uri, "*"*20))
log.debug(cmd)
try:
cmd = ''.join([self.cur_device.device_vars.get(x, x) \
for x in cmd.split(macro_char)])
except AttributeError:
pass
log.debug(cmd)
path = cmd.split()[0]
args = cmd.split()
log.debug(path)
log.debug(args)
self.cleanupChildren()
os.spawnvp(os.P_NOWAIT, path, args)
qApp.processEvents()
finally:
endWaitCursor()
def helpContents(self):
utils.openURL(self.docs)
def helpAbout(self):
dlg = AboutDialog(self, prop.version, self.toolbox_version + " (Qt4)")
dlg.exec_()
def __tr(self,s,c = None):
return qApp.translate("DevMgr5",s,c)
# XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
class PasswordDialog(QDialog):
def __init__(self, prompt, parent=None, name=None, modal=0, fl=0):
QDialog.__init__(self, parent)
self.prompt = prompt
Layout= QGridLayout(self)
Layout.setMargin(11)
Layout.setSpacing(6)
self.PromptTextLabel = QLabel(self)
Layout.addWidget(self.PromptTextLabel,0,0,1,3)
self.UsernameTextLabel = QLabel(self)
Layout.addWidget(self.UsernameTextLabel,1,0)
self.UsernameLineEdit = QLineEdit(self)
self.UsernameLineEdit.setEchoMode(QLineEdit.Normal)
Layout.addWidget(self.UsernameLineEdit,1,1,1,2)
self.PasswordTextLabel = QLabel(self)
Layout.addWidget(self.PasswordTextLabel,2,0)
self.PasswordLineEdit = QLineEdit(self)
self.PasswordLineEdit.setEchoMode(QLineEdit.Password)
Layout.addWidget(self.PasswordLineEdit,2,1,1,2)
self.OkPushButton = QPushButton(self)
Layout.addWidget(self.OkPushButton,3,2)
self.languageChange()
self.resize(QSize(420,163).expandedTo(self.minimumSizeHint()))
self.OkPushButton.clicked.connect(self.accept)
self.PasswordLineEdit.returnPressed.connect(self.accept)
def getUsername(self):
return to_unicode(self.UsernameLineEdit.text())
def getPassword(self):
return to_unicode(self.PasswordLineEdit.text())
def languageChange(self):
self.setWindowTitle(self.__tr("HP Device Manager - Enter Username/Password"))
self.PromptTextLabel.setText(self.__tr(self.prompt))
self.UsernameTextLabel.setText(self.__tr("Username:"))
self.PasswordTextLabel.setText(self.__tr("Password:"))
self.OkPushButton.setText(self.__tr("OK"))
def __tr(self,s,c = None):
return qApp.translate("DevMgr5",s,c)
# XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
def showPasswordUI(prompt):
try:
dlg = PasswordDialog(prompt, None)
if dlg.exec_() == QDialog.Accepted:
return (dlg.getUsername(), dlg.getPassword())
finally:
pass
return ("", "")
def openEWS(host, zc):
if zc:
status, ip = hpmudext.get_zc_ip_address(zc)
if status != hpmudext.HPMUD_R_OK:
ip = "hplipopensource.com"
else:
ip = host
return "http://%s" % ip